I have had this jig … I have had this jig for over ten years and its really very good, the only thing i hate about it is that they should have made the jig a little longer so clamps can be used on the female cut on the start of the cut as its very tight for room, But unlike most other jigs this one is ajustable as it has a manual adjustible stop. instead of fixed hammer in pegs which dont allow any tolerance, they are preset to 600. 615. 650, so your cut will be dead on on, Trends jig adjusts for play, BETTER.
Lack of Health and … Lack of Health and Safety! Alway use a Dust Mask! Video is a bit jerkey! The jig seems difficult to use no wonder there is a video!
Old trend video on how to join kitchen worktops…still in use today
I have had this jig …
I have had this jig for over ten years and its really very good, the only thing i hate about it is that they should have made the jig a little longer so clamps can be used on the female cut on the start of the cut as its very tight for room, But unlike most other jigs this one is ajustable as it has a manual adjustible stop. instead of fixed hammer in pegs which dont allow any tolerance, they are preset to 600. 615. 650, so your cut will be dead on on, Trends jig adjusts for play, BETTER.
Lack of Health and …
Lack of Health and Safety! Alway use a Dust Mask! Video is a bit jerkey! The jig seems difficult to use no wonder there is a video!
What no dustmask??, …
What no dustmask??, yes helpful but dangerous people! make sure you wear a dustmask when you use the router!
Very useful video. …
Very useful video. Helped me visualize what I was doing before attempting my own worktops. Many thanks
every bloody video …
every bloody video i go on freezes its anoying
Very useful video.
Very useful video.
Can anyone tell me …
Can anyone tell me wich jig is the easiest to use?
why does it need a …
why does it need a sub base ? doesnt the guide bush fit into the recess in the base.
lol its an advert …
lol its an advert for a Trend jig!! But they use a Dewalt router!! Lol
many thanks, im …
many thanks, im doing my first joint tomorrow
great
great
worst jig to use? …
worst jig to use?and slowest.